GetNBCC2010_1 {Wind Load}

GetNBCC2010_1 {Wind Load}

Syntax

SapObject.SapModel.LoadPatterns.AutoWind.GetNBCC2010_1

VB6 Procedure

Function GetNBCC2010_1(ByVal Name As String, ByRef ExposureFrom As Long, ByRef DirAngle As Double, ByRef Cpw As Double, ByRef Cpl As Double, ByRef UserZ As Boolean, ByRef TopZ As Double, ByRef BottomZ As Double, ByRef q As Double, ByRef GustFactor As Double, ByRef ImportanceFactor As Double, ByRef TerrainType As Long, ByRef CeWindward As Double, ByRef CeLeeward As Double, ByRef UserExposure As Boolean) As Long

Parameters

Name

The name of an existing Wind-type load pattern with an NBCC 2010 auto wind assignment.

ExposureFrom

This is 1 or 2, indicating the source of the wind exposure.

1 = From extents of rigid diaphragms

2 = From area objects

DirAngle

The direction angle for the wind load. This item applies only when ExposureFrom = 1.

Cpw

The windward coefficient, Cp. This item applies only when ExposureFrom = 1.

Cpl

The leeward coefficient, Cp. This item applies only when ExposureFrom = 1.

UserZ

This item is True if the top and bottom elevations of the wind load are user specified. It is False if the elevations are determined by the program.

TopZ

This item applies only when the UserZ item is True. It is the global Z-coordinate at the highest level where auto wind loads are applied. [L]

BottomZ

This item applies only when the UserZ item is True. It is the global Z-coordinate at the lowest level where auto wind loads are applied. [L]

q

The velocity pressure in kPa.

GustFactor

The gust effect factor.

ImportanceFactor

The importance factor.

TerrainType

This is 1, 2, or 3, indicating the terrain type.

1 = Open

2 = Rough

3 = User

CeWindward

The windward exposure factor, Ce. This item applies only when TerrainType = 3.

CeLeeward

The windward exposure factor, Ce. This item applies only when TerrainType = 3.

UserExposure

If this item is True, the wind exposure widths are provided by the user. If it is False, the wind exposure widths are calculated by the program from the extents of the diaphragms.

Remarks

This function retrieves auto wind loading parameters for NBCC 2010.

The function returns zero if the parameters are successfully assigned; otherwise it returns a nonzero value.

VBA Example

Sub GetWindNBCC2010()

'dimension variables

Dim SapObject as cOAPI

Dim SapModel As cSapModel

Dim ret As Long

Dim ExposureFrom As Long

Dim DirAngle As Double

Dim Cpw As Double

Dim Cpl As Double

Dim UserZ As Boolean

Dim TopZ As Double

Dim BottomZ As Double

Dim q As Double

Dim GustFactor As Double

Dim ImportanceFactor As Double

Dim TerrainType As Long

Dim CeWindward As Double

Dim CeLeeward As Double

Dim UserExposure As Boolean

'create Sap2000 object

Set SapObject = CreateObject("CSI.SAP2000.API.SapObject")

'start Sap2000 application

SapObject.ApplicationStart

'create SapModel object

Set SapModel = SapObject.SapModel

'initialize model

ret = SapModel.InitializeNewModel

'create model from template

ret = SapModel.File.New3DFrame(BeamSlab, 2, 144, 3, 336, 2, 432)

'define diaphragm constraints

ret = SapModel.ConstraintDef.SetDiaphragm("Diaph1", Z)

ret = SapModel.ConstraintDef.SetDiaphragm("Diaph2", Z)

'assign points to diaphragm

ret = SapModel.SelectObj.ClearSelection

ret = SapModel.SelectObj.PlaneXY("2")

ret = SapModel.PointObj.SetConstraint("", "Diaph1", SelectedObjects)

ret = SapModel.SelectObj.ClearSelection

ret = SapModel.SelectObj.PlaneXY("3")

ret = SapModel.PointObj.SetConstraint("", "Diaph2", SelectedObjects)

ret = SapModel.SelectObj.ClearSelection

'add new load pattern

ret = SapModel.LoadPatterns.Add("WIND", LTYPE_WIND)

'assign NBCC2010 parameters

ret = SapModel.LoadPatterns.AutoWind.SetNBCC2010_1("WIND", 1, 0, 0.8, 0.5, False, 0, 0, 0.75, 2.1, 1.1, 1, 0, 0)

'get NBCC2010 parameters

ret = SapModel.LoadPatterns.AutoWind.GetNBCC2010_1("WIND", ExposureFrom, DirAngle, Cpw, Cpl, UserZ, TopZ, BottomZ, q, GustFactor, ImportanceFactor, TerrainType, CeWindward, CeLeeward, UserExposure)

'close Sap2000

SapObject.ApplicationExit False

Set SapModel = Nothing

Set SapObject = Nothing

End Sub

Release Notes

Initial release in version 19.0.0.

This function supersedes GetNBCCC2010.

See Also

SetNBCC2010_1